powder coating save your cost

Powder coating is a new type of coating material which does not contain liquid solvent. It is widely used and has high recovery and utilization rate. Inside the paint does not contain volatile organic solvents, because the paint is solvent free, so in the process of construction and operation won't have stimulating smell, harmless to the construction personnel, the paint utilization rate is high, the secondary recovery utilization rate can reach more than 90%. Paint 

low price, good decorative performance, soft color, appearance fullness, in the spray curing will not form a bubble and pinhole, transport is also very convenient, not volatile and leakage.

Solidified into the texture of the curing agent for thermosetting powder coatings are mainly components including resin, paint, curing agent, additives, and the coating is divided into two major categories, namely thermosetting coatings and thermoplastic coating thermosetting coating is refers to the resin as film-forming substance, adding crosslinking reaction by heating to form 

insoluble and infusible hard coating; thermal plastic coating processing and spraying method is simple, thermal plastic coating heating and melting, leveling, cooling or extraction of membrane 

can be, do not need complex curing device, the paint is non-toxic, does not contain toxic substances, does not contain solvents, so does not occur poisoning, fire and the generation of waste, fully in line with national environmental protection requirements.

In order to ensure the use of powder coating properties, we need it to keep and dry ventilated warehouse, storage space at the same time also need to control the temperature in 35 degrees celsius. Only the quality of the material can be used to obtain a reliable type of 

protection. These paint products need to be stored in an environment free of organic solvents, as well as other contaminated materials. Everyone in the use of these powder coatings, it is necessary to do a good job in addition to electrostatic protection work. Because of the high concentration of dust in the environment, it may lead to the occurrence of electrostatic 

explosion hazards. For those that adhere to the skin surface coating, you and I need to use soap and water cleaning, do not use organic solvent removal.