powder coating no harm to people

The composition of powder coating mainly include: polyester, epoxy, acrylic resin, TGIC 

curing agent and pigments, fillers, additives, such as mixed according to certain 

proportion, after crushing hot extrusion process for preparing a, coating using 

electrostatic spraying, fluidized bed extraction coating, friction spraying, after heat 

curing, can make the powder coating to form a smooth bright permanent coating, also has a 

preservative effect. Is a new type of solid powder coating, paint environmental pollution, 

non-toxic, so there is no harm to the human body, there is no waste discharge problems, and 

the high utilization of raw materials, can save energy and resources.

Thermosetting powder coating is refers to thermosetting resin as film-forming substance, adding curing agent for crosslinking reaction after heating to form an insoluble and infusible hard texture coating; thermoplastic coating processing and spraying method is simple, thermoplastic 

paint only by heating and melting, leveling, cooling or liquid-solid extraction into 

membrane can and does not need complex apparatus for curing, the coating non-toxic, do not 

contain toxic substances, does not contain solvents, so does not occur poisoning, fire, 

waste and other issues, in full compliance with the requirements of the state environmental 

protection law.

Electrostatic spraying powder can play a role in energy conservation, powder coating because there is no volatile organic substances, so to avoid the waste and electrostatic spraying powder spraying a word you can pour thick film, do not need to render lacquer; using electrostatic spraying powder and economic benefit is obvious, high utilization efficiency of coating and realize automation, saving the human resource, high utilizing rate of the coating, do not need to use organic solvent, which will reduce the 

pollution to the environment.