powder coating nation wide

Due to its unique properties and coating characteristics, powder coating have been developing rapidly in China in recent years. According to the understanding of the present, there are about two thousand powder coating enterprises in our country, among which there are a considerable part of the foreign capital in China. 

However, our market is superior, so we need to continue the development of powder coating. But at the time of our development, we also face some problems. First, the domestic powder coating category is single, the quality of the middle and low levels. Then, equipment update slow, manufacturing technology investment shortage of special type powder coating lack of the 

status quo. What need to be noticed in the powder coating preservation and removal? 1, away from the fire source, to avoid direct sunlight, should be placed in a well ventilated, temperature 

of 35 degrees Celsius in the following places. 2, to avoid the storage of water, organic solvents, Oils and other materials contaminated sites. 3, after the powder coating do not exposed to 

the air, should be stamped or turn tightly to prevent debris mixed. 4, to avoid the long-term contact with the skin, the powder attached to the skin of the use of soap and water rinse clean, do not use the solvent.

Powder coating. 1, away from the fire source, to avoid direct sunlight, should be placed in a well ventilated, temperature of 35 degrees Celsius in the following places. 2, to avoid the storage of water, organic solvents, Oils and other materials contaminated sites. 3, after the powder coating do not exposed to the air, should be stamped or turn tightly to prevent debris mixed. 4, to avoid the long-term contact with the skin, the powder attached to the skin of the use of soap and water rinse clean, do not use the solvent. Handle: hand for silk, Peng song, floating. Feel rough, heavy hand, feel heavy, grasping the powder in the hands, powder, the more smooth Peng song, good quality, on the contrary, rough powder feel heavy, poor quality, not easy spraying, powder falling, waste. Volume: the larger the volume, the less the filling material in powder coating, the higher the cost. Powder quality is better, the smaller the size, the higher the powder coating, the lower the cost, the worse the quality of the powder, the same carton, look at the size of the powder, is a good powder, the size of the house is small, is the difference. Not easy to spray, two drop powder, waste of large, less spraying area, high cost. Storage time: good powder can be stored for a long time, the powder flow level and other effects unchanged. Poor powder can not be stored for a long time, poor powder 3 months after the flow adjustment and other effects of poor. Normal powder at room temperature shelf life of 12 months, the use of low quality raw materials, product quality is not stable, easy to degenerate. The use of poor raw materials to produce powder, spraying the surface in half a year will accelerate the aging.