powder coating is new

Powder coating is a new type of 100% solid powder coating without solvent. It has two major 

categories: thermoplastic coating and thermosetting coating. Coating by special resin, 

pigment and filler, curing agent and other additives, mixed in certain proportion and 

through hot extrusion and crushing and screening processes of preparation. They are stored 

at room temperature, stable, electrostatic spraying or fluidized bed dip coating, and then 

heated to bake melting and curing, so that the formation of a smooth and bright permanent 

coating, to achieve the purpose of decoration and corrosion protection.

Powder coating wear resistance, corrosion resistance, color and texture of a variety of product hardness and durability, the impact of slow distortion and deformation. And coating thickness: 50-80 micron guarantee, while the traditional coating failed to pass thickness. Excellent 

adhesion and flexibility are good resistance to chemical and mechanical, and the 

electrostatic layer gives significant paint thickness uniformity. Resistance to extreme 

weather tests, such as sunlight, UV, heat, cold and wet effects. (apply to polyester 

paint). This coating is covered with rough surface, products or smooth edges and round 

biscuits and sharp edges. No need for database application corrosion. It does not require a 

mixture of material or addiction with liquid paint. Manufacturing, without the use of 

solvent applications, will not emit toxic gases, therefore, with environmental protection 

features paint and low environmental impact, so that it is environmentally friendly.

Energy saving and environmental protection is the main theme of the development of the world, due to environmental protection and other outstanding performance, the powder coating will 

gradually replace the solvent paint. In recent years, low temperature curing coating began 

to emerge in the market. It is estimated that the coating 120 degrees C curing and 180-200 

degrees Celsius, when compared to 40%, can save about of the electric energy, energy saving 

advantages are obvious. Low temperature curing coatings will be the future development of 

the inevitable trend, but also the current research focus on the object.