powder coating has lead the market

Affect or improve the flow of powder coating has the following factors: 1, raw materials, powder resin, additives, pigments and fillers are affected by the origin of all types of. Resin softening point low flow flat. Leveling agent manufacturers a lot of. But it is mostly a kind of polyacrylate polymer. After the treatment of pigment filler surface is better, for example, the same proportion of imported titanium dioxide to do the high gloss powder gloss flow 

level is very good. Of course, when the proportion of resin additives larger flow Ping better, and sometimes too good to join the flow of silica, in order to prevent the flow of hanging or 

increase the edge angle coverage. 2, the dispersion effect of production equipment and process equipment, process flow control, such as mixing time, extrusion residence time, extrusion 

temperature, particle size control and so on have a greater impact on convection.

It is understood that there are two reasons, the price of a powder coating, paint, ink, plastics and other downstream market demand continues to rise, has brought opportunities to the 

powder coating, once had shortage of hot market phenomenon, the downstream market awesome, gave full price "for powder coating". Second, the rising cost of raw materials, whether it is artificial, raw materials also transport, the cost is rising, which also gave the powder coating industry has brought a certain cost pressures, cost pressures is undoubtedly one of the incentives of product prices. Electrostatic dusting powder coating installed note: should pay 

attention to be painted objects hanging 1, coating production line. Coating machine in advance through the trial dip to design racks and objects in the painting production line hanging way, to ensure that the workpiece in dipping in the best position. Fabrics coated with maximum plane should be close to the vertical, the other plane with a horizontal is angle of 10 degrees to 40 degrees, so that more than paint coating surface can be more smoothly drained away. 2, in the coating production line in order to prevent the diffusion of solvent in the workshop and dust fall into the paint tank, dip paint tank should be protected. 3, large objects in the 

coating production line dip coating, should be after the basic volatile solvent and then fed into the baking room. 4, powder coating should continue to pay attention to the determination of the viscosity of the paint, each class should be measured 1-2 times the viscosity, if the viscosity increased by more than 10% of the original viscosity, it should be added in a timely manner. When adding solvent, the dip coating should be stopped. After stirring, determination of viscosity of powder coating spray machine, and then continue to work.