powder coating for outdoor use

The main points of high light, Matt, sand grain art type etc. various kinds of color

varieties, coating tenacity, excellent mechanical properties, excellent weather resistant

type and light resistance, good performance of baking transition.

Application: suitable for

long-term outdoor exposure products, such as decorative and protective grille, high-speed

guardrail, auto parts, air conditioner outdoor unit, gas station equipment, door and window

frame, bicycles and other outdoor goods.

Physical properties of powder:

Proportion: 1.4-1.7

(due to different color and luster)

Size distribution: 100% less than 100 microns (can be

adjusted according to the special requirements of the painting)

Liquidity: 120-140

Curing

conditions: 200 degrees (temperature), 10 minutes

Film properties

Test item

Inspection

standard or method

Test index

High light

Half / flat

No light

Impact resistance

ISO6272

GB/T1732-

1993

50cm

40cm

Cupping test

ISO1520

GB/T9753-1988

8mm

7mm

Adhesion (grid method)

ISO2409

GB/T9286-1998

Bend

ISO1519

GB/T6742-1986

2mm

3mm

Pencil hardness

ASTMD3363

GB/T6739-1996

1H-2H

Salt spray test

ISO7253

GB/T1771-1991

>500 hours

Damp heat test

ISO6270

GB/T1740-1979

>1000 hours

Heat resistance

150 degrees /24 hours (white)

Excellent light resistance, delta = 0.3-0.4

Post

tolerance

Florida exposure

ISO2810

South 45 ~ 12 months

The light is not less than 50%

Artificial accelerated aging

60 /8 hours UV+50 hours /4 hours of condensation, cycle 500

hours

The light is not less than 50%

Color stability: delta = 3.5

Note:

More than 1 of the test

with 0.8 mm thick rust and oil removal cold-rolled steel plate, the film thickness is 50-70

microns.

2 the performance index of the coating film may change with the change of color and

luster.

Average coverage: 9-12 square meters / kg, film thickness of 60 microns (to 100% of

the powder coating usage)

Packaging: carton packaging, lined with two layers of polyethylene

bags, 20 kg net weight per box.

Storage requirements: stored below 35 degrees Celsius,

ventilation, dry, clean room, not close to the fire, heating, avoid direct sunlight, no

open pit. Under the above conditions, the powder can be stored stably for 12 months. Over

the storage period can be re inspection, if the results meet the requirements, can still be

used.

Health and safety: the powder coating is a non-toxic product, but in the use of the

process should avoid the inhalation of dust. Suggested that the operator wear suitable dust

masks, glasses. If possible, try to avoid long-term contact with the skin and powder

coating.