The main points of high light, Matt, light and heavy duty type, art type powder and various
color varieties, coating adhesion, hardness, flexibility and other mechanical properties
are excellent; chemical corrosion resistance and excellent electrical insulation is good.
Application: suitable for a variety of indoor products, electrical appliances, instruments,
medical equipment, home, auto parts, metal furniture, fitness equipment and other indoor
decorative painting, also suitable for coating anti-corrosion equipment, piping and
fittings etc..
Physical properties of powder
Proportion: 1.4-1.7 (due to different color and
luster)
Size distribution: 100% less than 100 microns (can be adjusted according to the
special requirements of the painting)
Liquidity: 120-140
Curing condition:
A -200 C (15
minutes, the temperature of the workpiece) (light or light)
B -180 C (15 minutes, the
temperature of the workpiece) (light or light)
Type -140 C C (temperature), 15 minutes (Gao
Guang)
Film properties
Test item
Inspection standard or method
Test index
Type A
C, B type
Impact
resistance
ISO6272
GB/T1732-1993
40cm
50cm
Cupping test
ISO1520
GB/T9753-1988
5mm
8mm
adhesion
(grid
method)
ISO2409
GB/T9286-1998
0
Bend
ISO1519
GB/T6742-1986
3mm
2mm
Pencil hardness
ASTMD3363
GB/T6739
-1996
1H-2H
Salt spray test
ISO7253
GB/T1771-1991
>500 hours
Damp heat test
ISO6270
GB/T1740-1979
>1000 hours
Heat resistance
100 degrees /24 hours (white)
Excellent light resistance, delta =
0.3-0.4
Note:
More than 1 of the test with 0.8 mm thick rust and oil removal cold-rolled
steel plate, the film thickness is 50-70 microns.
2 or more of the film's performance
indicators may be slightly reduced with the decrease of gloss.
Average coverage: 9-12 square
meters / kg, film thickness of 60 microns (to 100% of the powder coating using the
calculation)
Packaging: carton packaging, lined with two layers of polyethylene bags, 20 kg
net weight per box.
Storage requirements: stored below 25 degrees Celsius, ventilation, dry,
clean room, not close to the fire, heating, avoid direct sunlight, no open pit. Under the
above conditions, the powder can be stored stably for 6 months. Over the storage period can
be re inspection, if the results meet the requirements, can still be used.
Health and
safety: the powder coating is a non-toxic product, but in the use of the process should
avoid the inhalation of dust. Suggested that the operator wear suitable dust masks,
glasses. If possible, try to avoid long-term contact with the skin and powder coating.