powder coating energy save

Epoxy powder coating with excellent adhesion, mechanical properties, resistance to stone impact resistance, chemical resistance and corrosion resistance, these characteristics can be 

achieved at low temperature (130 degrees C) after 15min curing. For parts of the painting under the hood, which can meet the use requirements under extreme environment. By blasting the cast iron engine block directly with epoxy powder coating, short wave infrared fast curing (160 DEG C, 8min), then the key parts of the cylinder head surface machining, achieve micron level tolerance 

degree, is suitable for sealing surface of the positioning pad, coating requirements can withstand high speed machining, does not appear shattered, roll layer or the surrounding fin and other 

defects.

Powder coating light stabilizer is a kind of material which can improve the stability of molecular material, it can prevent the aging of polymer materials, and greatly improve their service life. 

Light stabilizer to inhibit or reduce photodegradation, polymer and composite material light performance enhancing substances, because most of the light stabilizers absorb ultraviolet light, so habit is often the this kind of substances known as UV absorbers. Light stabilizers are very significant for the prevention of light aging and prolong their service life, and the amount of light stabilizers is very small, generally only 0.01%~0.5% of the polymer mass.

Energy saving and environmental protection is the main theme of the development of the world, due to environmental protection and other outstanding performance, the powder coating will gradually 

replace the solvent paint. In recent years, low temperature curing coating began to emerge in the market. It is estimated that the coating 120 degrees Celsius curing and 180-200 degrees Celsius, 

can save about four of the electric energy, energy saving advantages are obvious. Low temperature curing coatings will be the future development of the inevitable trend of powder coating, 

but also the current research focus of the object.