know more points about powder coating

Powder coating as a substitute for liquid coating market trends. Coating of low VOC 

content, easy to clear, the paint can be recycled after the use of the construction of the 

film basically does not produce pinhole, usually easier than the liquid coating 

construction, the formation of a good film durability. Advantages of environmental 

protection and technology is the key to substitute the powder coating for liquid coating.

The particle diameter distribution, content, pigment and filler liquid leveling agent, wax 

type delustrant powder components easily affect the glass transition temperature of 

additives will also have certain influence on the storage stability of powder coating in 

the formula design to comprehensive consideration. The process of coating, in addition to 

the effects of the formula design, the coating itself dryness and suitable spraying 

environmental conditions is the basic guarantee of the quality of spraying, powder packing 

and storage temperature is too high, damp or environmental humidity is too big, will 

inevitably lead to the powder agglomeration phenomenon, so the packaging process and 

coating construction environment is also very important the.

For the custody and use of powder coating still have a lot of attention, first of all, away from fire, avoid direct sunlight, should be in a well ventilated place in the temperature below 35 DEG C, secondly, avoid storing in susceptible to water, organic solvent, oil and other materials 

contaminated sites. In addition, after the coating do not exposed to the air, should be 

stamped or turn tightly to prevent debris mixed, and avoid prolonged contact with the skin, 

the skin is attached to the application of powder soap and water wash, do not use 

solvents.

Now people on environmental protection is more and more high. Do the powder paint 

is environmentally friendly paint coating market has become popular products, but also for 

the coating process is relatively simple, high rate of finished products, in general, if 

the proper measures, can maximize the control of energy consumption of unqualified products 

significantly reduced, in the production process of anodic oxidation, electrophoresis 

coating in general, water and electricity consumption is quite large, aluminum processing 

industry especially in the oxidation process.