industrial powder coating

Powder coating on the principle of electric field to achieve its adhesion, each metal flow is marked with a high voltage cathode, which led to the powder emitted when the powder with a large 

number of negative charges. Heating curing of coating can be translated for durability of the coating, according to temperature and time tagging for baking, if the temperature is low will lead to the formation of powder patterns, paint by electromagnetic adsorption principle is difficult to be destroyed the internal structure, that the adhesion of the coating is very strong. Coating 

anticorrosion performance is strong, and definitely not from pitot layer phenomenon, can protect the ship from the bottom of the sea salt, ultraviolet radiation and other invasive, but also to prevent water penetration into the parts inside.

We need to know some characteristics of powder coatings, from the name we can see that 

this is a kind of coating, so it is generally used in equipment, some of the paint appearance. But the coating and the coating is actually have very different, because using powder coatings can have corrosion effect. This is mainly because the coating has better chemical stability, so can make objects can be isolated from the external environment, to prevent corrosion, is because of this characteristic, so it can used in pipes and vessels. Because these places are some of the places where corrosion is more serious.

In order to ensure the use of powder coating properties, we need it to keep and dry ventilated warehouse, storage space at the same time also need to control the temperature in 35 degrees celsius. Only in this way can the quality of the powder type material be guaranteed. These paint products need to be stored in an environment free of organic solvents, as well as other 

contaminated materials. Everyone in the use of these coatings, it is necessary to do a good job in addition to electrostatic protection work. Because of the high concentration of dust in the 

environment, it may lead to the occurrence of electrostatic explosion hazards. For those that adhere to the skin surface coating, you and I need to use soap and water cleaning, do not use 

organic solvent removal.