future will be powde coating's

Powder coating with high mechanical strength, no pollution, saving energy and resources of 

many advantages. The coating on the principle of electric field to achieve its adhesion, 

each metal flow is marked with a high voltage cathode, which led to the powder emitted when 

the powder with a large number of negative charges. The coating curing into durable 

coating, baking temperature and time according to the mark, if the temperature is low will 

cause the powder can not form a pattern, the coating on the adsorption principle of 

electromagnetic field is difficult to damage the internal structure, so that the adhesion 

of the coating is very strong. Iron and steel powder coating corrosion resistance is 

strong, absolutely not skin layer phenomenon, can protect the ship from invading the sea 

salt, ultraviolet radiation, but also to prevent water penetration into the inside parts.

Powder coating is coated by electrostatic, so you can add a variety of chemical liquid we 

usually besmear harmful film, wetting, antiseptic and other additives. This will also 

reduce the bacterial contamination, prevent the deterioration of common problems such as 

common coating. At the same time, the engineering period is shortened. Ordinary coating

are generally water, but also in the transport process, when the temperature is below zero, 

it will freeze, which greatly limits the seasonal transport. But the powder coating is not 

so much trouble, the paint is added to the water in the construction site, so in terms of 

transport do not have to worry about the water. Of course, the paint is one of the most 

popular, is that it is relatively fast smell dissipated, almost in the finish after the 

smell has dissipated clean. So the characteristics of the paint or a lot of it, and its 

development will be better and better.

In fact, the essence of powder coating is a kind of paint. It is used in the outer surface of a number of vessels and pipes, in these areas, a layer of the coating, so that it can play a role in anti-corrosion. We know that the ship at sea, for metal hull and water in direct contact, is very prone to corrosion, so at this time you need to be coated with a stable water isolation coating, and chemical properties of the coating is very stable, so the performance is very outstanding.