baking temperarure 180 degree

Fillers or pigments, such as expansion are covered by a coating system in the solid base material. In addition to the formula that can make the economy, there are other benefits of cheap filler. 

Compared with her, the larger particle size pigments, they give the film smaller size of pigment particles with the filler particles, thus the best gap filler density. As a filler in the powder coating extinction agent, and to support the anti corrosion protection. The most commonly used filler is calcium carbonate. These are the natural occurrence of chalk. The type of the filler is used as an extinction agent for the platelet like structure. The impact of the flow of suitable talc, a naturally produced, which is also present in the platelet.

Powder coating are good for controlling the ideal coating density. Barium sulfate is obtained as a natural and precipitation. The advantages of industrial production of lighter colors are less impurities, and the definition of particle size distribution. Nevertheless, commonly used in powder coating still showed some unique properties, including polyolefin powder coating has excellent solvent resistance; powder coatings have outstanding weatherability; powder coatings have excellent wear resistance; polyvinyl chloride has better price / performance ratio; the powder coating has the appearance beautiful, artistic advantages. These characteristics make the powder coatings in a large proportion of the paint market. Metal pretreatment: skim 

sheet and application of phosphate coating. Paint: make the powder coating electrostatic adhere to the metal (in the spray room, powder recovery) cure: powder coating of a baked in the 

degree of polymerization of 180 degrees Celsius, and make the final finish. Dyed products of any metal parts metal product staining can withstand up to 200 degrees of ceramic painting and masonry staining density fiber board, the glass can be used powder coating hand-painted products list is quite broad. Industry, in the most rapid increase in the consumption of powder coatings. An 

example is the pipeline of the oil drilling and pumping of the inner surface, in an environment, hypertension, factors existing in the high temperature and corrosive medium, are able to play a 

disruptive effect on almost all except a very few exceptions, coverage, operating.