texture powder coating

2016/9/30 8:35:37

Can provide a hybrid, pure polyester powder coating art patterns of various kinds of resin 


type, which are suitable for indoor or outdoor use. This product has a unique and luxurious 


decorative effect, can help cover up the defects of the substrate itself. Widely used in 


all kinds of high-grade metal products.

For metallic powder coating, should pay attention 


to the following two points: 1 for this type of products containing metal paint, should 


ensure that the system is well grounded in the use of electrostatic gun construction, while 


setting a lower voltage and electrostatic powder amount, to prevent ignition phenomenon 


when spraying. 2 in order to improve the decoration of the coating and to overcome the easy 


cleaning of the metal pigment, we recommend the use of transparent powder coating to cover 


the light.

Product series:

Can provide sand lines, hammer lines, silk patterns, marble lines, 


metal appearance, and other products of a variety of effects.

Can provide a variety of 


products according to the needs of users. (we do not recommend the use of gloss meter to 


measure the gloss of the art film)

Physical properties of powder:

Proportion: 1.2-1.8 (due to 


different color and luster)

Particle size distribution: 100% less than 100 microns (specific 


indicators depending on the effect of fine arts, can be adjusted according to the special 


requirements of the painting)

Liquidity: 120-140

Curing conditions: according to the product 


of the resin type and set, specific please refer to the product with the attached 


instructions.

Film properties

Test item

Inspection standard or method

Test index

Impact 


resistance

ISO6272

GB/T1732-1993

30-50cm

Cupping test

ISO1520

GB/T9753-1988

6mm

Adhesion (grid 


method)

ISO2409

GB/T9286-1998

0

Bend

ISO1519

GB/T6742-1986

3mm

Pencil hardness

ASTMD3363

GB/T6739-


1996

1H-2H

Salt spray test

ISO7253

GB/T1771-1991

>500 hours

Damp heat test

ISO6270

GB/T1740-1979

>1000 hours

Note:

More than 1 of the test with 0.8 mm thick rust and oil removal cold-rolled 


steel plate, the film thickness is 60-80 microns.

2 the performance index of the film may 


vary with the fine arts and the types of the resin.

Average coverage: 8-11 square meters / 


kg, film thickness of 70 microns (to 100% of the powder coating usage)

Recommended film 


thickness: we suggest that the thickness of the film is 60-80 microns.

Packaging: carton 


packaging, lined with two layers of polyethylene bags, 20 kg net weight per box.

Storage 


requirements: stored below 35 degrees Celsius, ventilation, dry, clean room, not close to 


the fire, heating, avoid direct sunlight, no open pit. Under the above conditions, the 


powder can be stored stably for 12 months. Over the storage period can be re inspection, if 


the results meet the requirements, can still be used.

Health and safety: the powder coating 


is a non-toxic product, but in the use of the process should avoid the inhalation of dust. 


Suggested that the operator wear suitable dust masks, glasses. If possible, try to avoid 


long-term contact with the skin and powder coating.


+86-28-86101106
+86 18782920321
Skype Chat
Ali Chat
FeedBack