powder coating for indoor use

2016/10/6 10:43:06

The main points of high light, Matt, light and heavy duty type, art type powder and various 

color varieties, coating adhesion, hardness, flexibility and other mechanical properties 

are excellent; chemical corrosion resistance and excellent electrical insulation is good.

Application: suitable for a variety of indoor products, electrical appliances, instruments, 

medical equipment, home, auto parts, metal furniture, fitness equipment and other indoor 

decorative painting, also suitable for coating anti-corrosion equipment, piping and 

fittings etc..

Physical properties of powder

Proportion: 1.4-1.7 (due to different color and 

luster)

Size distribution: 100% less than 100 microns (can be adjusted according to the 

special requirements of the painting)

Liquidity: 120-140

Curing condition:

A -200 C (15 


minutes, the temperature of the workpiece) (light or light)

B -180 C (15 minutes, the 


temperature of the workpiece) (light or light)

Type -140 C C (temperature), 15 minutes (Gao 


Guang)

Film properties

Test item

Inspection standard or method

Test index

Type A

C, B type

Impact 


resistance

ISO6272

GB/T1732-1993

40cm

50cm

Cupping test

ISO1520

GB/T9753-1988

5mm

8mm

adhesion

(grid 


method)

ISO2409

GB/T9286-1998

0

Bend

ISO1519

GB/T6742-1986

3mm

2mm

Pencil hardness

ASTMD3363

GB/T6739


-1996

1H-2H

Salt spray test

ISO7253

GB/T1771-1991

>500 hours

Damp heat test

ISO6270

GB/T1740-1979

>1000 hours

Heat resistance

100 degrees /24 hours (white)

Excellent light resistance, delta = 


0.3-0.4

Note:

More than 1 of the test with 0.8 mm thick rust and oil removal cold-rolled 

steel plate, the film thickness is 50-70 microns.

2 or more of the film's performance 

indicators may be slightly reduced with the decrease of gloss.

Average coverage: 9-12 square 

meters / kg, film thickness of 60 microns (to 100% of the powder coating using the 

calculation)

Packaging: carton packaging, lined with two layers of polyethylene bags, 20 kg 

net weight per box.

Storage requirements: stored below 25 degrees Celsius, ventilation, dry, 

clean room, not close to the fire, heating, avoid direct sunlight, no open pit. Under the 

above conditions, the powder can be stored stably for 6 months. Over the storage period can 

be re inspection, if the results meet the requirements, can still be used.

Health and 

safety: the powder coating is a non-toxic product, but in the use of the process should 

avoid the inhalation of dust. Suggested that the operator wear suitable dust masks, 

glasses. If possible, try to avoid long-term contact with the skin and powder coating.


+86-28-86101106
+86 13967990631; +86 13438865967 ;+86 18782920321
Skype Chat
Ali Chat
FeedBack